Job cuts at Schaeffler: severance pay and your rights
What employees need to know now: status of the cuts, severance practice and your rights.
Updated on 10/11/2026
Employees in GermanyEmployees DE
31,957
As of 2025
RevenueRevenue
€23.5 bn
Group, financial year
HeadquartersHeadquarters
Herzogenaurach
Bavaria
Stock exchange listingStock exchange
MDAX
Industry Automotive
Jobs affectedJobs affected
2,660
Schaeffler 2025-2027
Severance factorSeverance factor
0.7 to 1.2
Monthly salaries per year
The factor range is our estimate, not a commitment by the company. The actual severance pay depends on the individual case, in particular length of service, age and pay grade.
Severance pay at Schaeffler
Severance factor
0.7 to 1.2
Monthly salaries per year of employment
Editorial estimate- 0
- 0,5
- 1,0
- 1,5
- 2,0
Vertical line: rule of thumb 0.5, no legal entitlement
Base amount
not known
Negotiating partner
Works council and IG Metall
Current arrangements
Two programmes are running side by side at Schaeffler. The first was announced on 5 November 2024, one month after the merger with Vitesco Technologies: 4,700 jobs in Europe, of which 2,800 in Germany at ten sites, alongside 1,000 new hires abroad. By the end of September 2026, 3,715 of these jobs had been cut, and agreements are in place for the remaining 985. Completion is now expected at the end of 2028. In Germany, 1,768 partial retirement scheme (Altersteilzeit) contracts have been signed, well above the roughly 1,300 expected.
The new programme of 3 November 2026
With its quarterly figures, Schaeffler announced a second programme: a net 3,460 jobs at 16 European sites, of which around 2,660 in Germany. About half relate to production, 30 per cent to research and development, and 20 per cent to other functions. The plan is to close Dortmund with 430 employees, Schwalbach with around 385 (of whom about 190 are affected, with a large share expected to move to Frankfurt), Berlin with around 270 and Morbach with 160 employees, as well as a production site in Herstal in Belgium. The tool shop in Höchstadt will be discontinued, and further adjustments affect Erlangen, Schweinfurt, Herzogenaurach, Bühl, Nuremberg and Regensburg. Implementation is planned mainly for 2027 and 2028, in as socially responsible a way as possible according to the company and on the basis of the 2018 Future Agreement. Measured against the German core workforce of 31,957 employees, this is around 9 per cent, and around 18 per cent together with the earlier measures. Schaeffler has not mentioned any exclusion of redundancy dismissals (betriebsbedingte Kündigung). A voluntary, time-limited solidarity contribution is also planned, starting with the executive board and covering all levels of the hierarchy.
Assessment of the severance factor
Schaeffler does not state fixed rates. We derive a factor of 0.9, with a range of 0.7 to 1.2. This is supported by the negotiated framework of the 2018 Future Agreement, the instruments used (voluntary programme, termination agreements (Aufhebungsvertrag) and partial retirement contracts), the strong position of IG Metall, and the salary level in central functions and development. The earnings situation has a dampening effect, as does the fact that there is less to negotiate at a site that is to be closed than where only capacity is being adjusted.
The factor is our own assessment, not a commitment by the company. At Schaeffler, the decisive factor is the site: in Dortmund, Berlin and Morbach the issue is closures, in Schwalbach a relocation to Frankfurt with offers to transfer, and in Schweinfurt, Herzogenaurach and Regensburg capacity and central functions. Length of service, age and possible special protection against dismissal also play a role, as do other circumstances of the individual case.
The factor is our estimate, derived from industry, region, co-determination and economic situation, and is not a commitment by the company. Length of service, age and special protection against dismissal can shift the result considerably.
Severance calculator
What you could be entitled to at Schaeffler
Possible severance pay
–
Special protection against dismissal?
Non-binding guidance based on the standard formula, not legal advice. There is only a right to severance pay in exceptional cases; the actual amount depends on the individual case, for example on age, maintenance obligations and whether the dismissal is valid. AbfindungsHero puts you in touch with employment law firms and does not provide legal services itself.
Headcount development
Schaeffler AG, Germany
Source: annual reports
2024 · Merger with Vitesco Technologies, completed in the fourth quarter. As a result, the workforce rose from 83,362 to 115,055. The increase is a portfolio effect, not a hiring drive. Scale starts at 19,000, not at zero.
Key facts at a glance
- How the cuts are made
- Voluntary programmes and dismissals
- Deadline for filing a claim
- 3 weeks from receipt of the notice of dismissal
Timeline of the job cuts
- Four site closures and 2,660 jobs in Germany 11/2026 With its quarterly figures on 3 November 2026, Schaeffler announced a new earnings improvement programme: a net 3,460 jobs at 16 European sites, of which around 2,660 in Germany and around 800 in the rest of Europe. About half relate to production, 30 per cent to research and development, and 20 per cent to other functions. The plan is to close Dortmund with 430 employees, Schwalbach with around 385 employees (of whom about 190 are affected, with a large share expected to move to Frankfurt), Berlin with around 270 and Morbach with 160 employees, as well as a production site in Herstal in Belgium with about 15 jobs. The tool shop in Höchstadt will be discontinued, and further adjustments affect Erlangen, Schweinfurt, Herzogenaurach, Bühl, Nuremberg, Regensburg and sites in France and Slovakia. Implementation is planned mainly for 2027 and 2028, on the basis of the 2018 Future Agreement and, according to the company, in as socially responsible a way as possible. Measured against the German core workforce of 31,957 employees (as at 30 September 2026), this is around 9 per cent; together with earlier measures and 1,800 partial retirement contracts, around 18 per cent. No exclusion of redundancy dismissals has been mentioned. A voluntary, time-limited solidarity contribution is planned, starting with the executive board and covering all levels of the hierarchy. From 2030, around 300 million euros a year are to be saved, and the restructuring costs are around 480 million euros.
- Closure of Steinhagen and job cuts in Schweinfurt At the end of August 2025, Schaeffler confirmed the closure of the Steinhagen site in North Rhine-Westphalia by the end of 2026, including the end of production there; in Schweinfurt, around 590 jobs are facing cuts. In total, ten German sites are affected. For the implementation, the group is budgeting one-off expenses of around 580 million euros and expects annual savings of about 290 million euros from 2029. In Schweinfurt, around 590 jobs are facing cuts; for Steinhagen, Schaeffler has not given a figure.
- Restructuring programme after Vitesco merger 11/2024 One month after the merger with Vitesco Technologies, Schaeffler announced on 5 November 2024 the cutting of 4,700 jobs in Europe, of which 2,800 in Germany at ten sites. This is offset by 1,000 new hires abroad at lower labour costs, so a net of around 3,700 jobs will be lost. The focus in Germany is on Schweinfurt and Homburg; the Steinhagen plant will close by the end of 2026. Two sites elsewhere in Europe will be closed completely. Implementation 2025 to 2027, savings target of around 290 million euros a year from 2029. The works council calls the cuts disproportionate.
Schaeffler AG: job cuts, severance pay and employees' rights
Four German sites are set to close, as at 7 November 2026
With its quarterly figures on 3 November 2026, Schaeffler announced a new earnings improvement programme. A net 3,460 jobs at 16 European sites will be cut, of which around 2,660 in Germany and around 800 in the rest of Europe. About half affect production, 30 per cent research and development, and 20 per cent other functions. Four German sites are to be closed: Dortmund with 430 employees, Schwalbach with around 385 employees, of whom about 190 jobs are affected and a large share are expected to move to Frankfurt, Berlin with around 270 and Morbach with 160 employees. A production site in Herstal in Belgium is also affected. The tool shop in Höchstadt will be discontinued, and further adjustments affect Erlangen, Schweinfurt, Herzogenaurach, Bühl, Nuremberg and Regensburg, as well as sites in France and Slovakia. Concrete information is to follow at local staff meetings.
What this means for the workforce
The German core workforce stood at 31,957 employees on 30 September 2026. The roughly 2,660 jobs therefore correspond to about 9 per cent. If the earlier measures and the 1,800 partial retirement scheme (Altersteilzeit) contracts are added, the company itself arrives at around 18 per cent. Implementation is planned mainly for 2027 and 2028. From 2030, Schaeffler aims to save around 300 million euros a year, and the one-off restructuring costs are around 480 million euros, mostly as a provision in 2026.
No exclusion of redundancy dismissals
Schaeffler states as its aim an implementation that is as socially responsible as possible, on the basis of the 2018 Future Agreement, and announces close dialogue with employee representatives. The company has not declared any exclusion of redundancy dismissals (betriebsbedingte Kündigung). This is the most important difference from groups such as Volkswagen or Mercedes-Benz, where such an exclusion is laid down in collective agreements. Instead, a voluntary, time-limited solidarity contribution is planned, starting with the executive board and covering all levels of the hierarchy; the details still have to be agreed with the bodies concerned. While a reconciliation of interests (Interessenausgleich) and a social plan (Sozialplan) are being negotiated, patience pays off: what is agreed there generally does not apply retroactively to everyone who signed a termination agreement (Aufhebungsvertrag) beforehand.
The first programme continues
In the fourth quarter of 2024, Schaeffler completed the merger with Vitesco Technologies; as a result, the workforce rose from 83,362 to 115,055. One month later, on 5 November 2024, the group announced the cutting of 4,700 jobs in Europe, of which 2,800 in Germany at ten sites, alongside 1,000 new hires abroad. By the end of September 2026, 3,715 of these jobs had been cut, and agreements are in place for the remaining 985. Completion is now expected at the end of 2028 instead of 2029. In Germany, 1,768 partial retirement contracts have been signed, more than the roughly 1,300 expected. The Steinhagen plant will be closed by the end of 2026, and around 590 jobs in Schweinfurt were facing cuts.
Gross is not net
One detail that is often overlooked: in the first programme, the 4,700 jobs being cut were offset by 1,000 new hires, albeit abroad at lower labour costs. So it is not only about cuts, but also about relocation. This becomes visible in the site decisions: the manufacture of standard bearings moved from Brașov in Romania to Asia, while Brașov in turn took over production from Homburg and Taiwan. In the new programme, relocation within Germany is visible: a large share of the Schwalbach employees are expected to move to Frankfurt.
The framework for the cuts has been in place since 2018
In implementing the cuts, Schaeffler explicitly refers to the Future Agreement concluded with IG Metall in 2018. The reduction is to be achieved through natural turnover, voluntary programmes, and termination and partial retirement agreements. For those affected, this is the key piece of information: there is a negotiated framework, and the instruments rely on voluntary participation, which pushes up the price of leaving. The high number of signed partial retirement contracts shows that this route is being used in practice.
The group's position
In 2025, Schaeffler achieved sales of 23.5 billion euros with an earnings margin of 4.0 per cent, compared with 3.5 per cent the previous year; free cash flow was 266 million euros. The group employs around 110,000 people at 100 plants. It names humanoid robotics, defence and aerospace as new growth areas. The second round of cuts shows that the synergies from the Vitesco merger alone were not enough.
Are you affected by the job cuts at Schaeffler?
How hard you are hit at Schaeffler depends heavily on the site: in Dortmund, Berlin and Morbach the issue is closures, in Schwalbach a relocation with an offer to transfer to Frankfurt, and in Schweinfurt, Herzogenaurach and Regensburg capacity and central functions. The amount of severance pay (Abfindung) depends on length of service, age, salary, maintenance obligations and a possible severe disability. In a free initial consultation, an employment lawyer from our network will assess what is negotiable at your site.
Affected by job cuts at Schaeffler?
Whether an offer is fair can only be judged on the specific case. An employment law firm will assess your situation free of charge.